ADVP is a free Windows utility — downloaded from the MedNet GSO Library — that acts as a DICOM Print SCU in place of the host modality, sending a test image straight to the DryStar 5300 over the network so you can check the printer's DICOM interface on its own.
Applies to
DryStar 5300 (Type 5365/100) — source Chapter 3.2 "Machine specific tools, software tools and auxiliary means," §2.7 "ADVP," document pp.152-153.
Personnel
1 technician · Basic — install/run a Windows freeware utility, pick a handful of menu options, and fill in two network fields (AE Title, IP address); no disassembly, measurement, or code interpretation. Assumes the PC is already reachable on the same network as the printer — see [Connecting the Service PC to the Web Pages](agfa-dry-drystar5300-sw-web-pages-connection-network-proxy-setup) for that prerequisite if the printer isn't reachable yet (derived — that atom covers the general network/IP prerequisite, not ADVP itself, which this section does not itself describe how to set up).
Steps
6 steps
Source
DD+DIS346.05E — Drystar 5300 Repair and Service, Machine specific tools, software tools and auxiliary means, Chapter 3.2 §2.7 "ADVP", Edition 1, Revision 7 (2006-01-26), document pp.152-153 (chapter-relative footers "Chapter 3.2/36" and "Chapter 3.2/37")
Full step-by-step for ADVP — DICOM Test Tool
All 6 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.
Source: DD+DIS346.05E — Drystar 5300 Repair and Service, Machine specific tools, software tools and auxiliary means, Chapter 3.2 §2.7 "ADVP", Edition 1, Revision 7 (2006-01-26), document pp.152-153 (chapter-relative footers "Chapter 3.2/36" and "Chapter 3.2/37"). Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.