Connect the Service PC to the Drystar 5300 (network or crossed cable) and adapt the PC IP address
Get a Service PC talking to the DryStar 5300's browser-based web pages — connect it to the printer over the hospital network or with a direct crossed UTP cable, then, only if the printer's homepage still doesn't display, adapt the Service PC's own IP address using the printer's IP as a reference.
Applies to
DryStar 5300 — this section's own corner stamps label the printer, in both spellings found across the slice, "(Typ 5365)" and "(Type 5365)" (no "/100" suffix) — source Chapter 7, Appendix §6.1 "Connection to the Web Pages" + §6.2 "Adaptation of the PC IP address," Field Modifications (DD+DIS350.05E), Edition 1, Revision 9 (2006-01-20), document p.482-484.
Personnel
1 technician · Basic — connect a network cable (or a crossed UTP cable directly to the printer), launch a browser, and — only if the homepage doesn't load — enter a Windows IP address/subnet mask on the Service PC, optionally after reading the printer's own IP address and subnet mask from its key-operator menu. No printer disassembly, measurement, or code interpretation. Source assigns no formal skill-level label to this section (derived).
Steps
0 steps
Source
DD+DIS350.05E — Drystar 5300, Field Modifications, Chapter 7, Appendix §6.1 "Connection to the Web Pages" + §6.2 "Adaptation of the PC IP address" (chapter-footer "Chapter 7/20" through "Chapter 7/22"), Edition 1, Revision 9 (2006-01-20), document p.482-484.
Full step-by-step for Connect the Service PC to the Drystar 5300 (network or crossed cable) and adapt the PC IP address
All 0 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.
Source: DD+DIS350.05E — Drystar 5300, Field Modifications, Chapter 7, Appendix §6.1 "Connection to the Web Pages" + §6.2 "Adaptation of the PC IP address" (chapter-footer "Chapter 7/20" through "Chapter 7/22"), Edition 1, Revision 9 (2006-01-20), document p.482-484.. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.