ProcedureSoftwareInstallation
Software Update via CF Card
Install a corrective software patch on the DryStar 5300 directly from a CF card at the local keypad, then confirm the update succeeded and refresh the CF card backup.
Applies to
DryStar 5300, Type 5365/100 — source Chapter 3.2/39, §3.1.1 "Software Update via CF card," Repair and Service: Machine specific tools, software tools and auxiliary means, Edition 1, Revision 7 (2006-01-26), document p.155.
Personnel
1 technician · Basic — key-operator menu navigation at the local keypad (see Key-Operator Menu on the Local Keypad for the keypad controls themselves); no PC, browser, or disassembly involved, unlike the remote-computer alternative covered in §3.1.2. Source assigns no formal skill-level label to this section (derived).
Steps
4 steps
Source
DD+DIS346.05E — Drystar 5300, Repair and Service: Machine specific tools, software tools and auxiliary means, Chapter 3.2/39, §3.1.1 "Software Update via CF card", Edition 1, Revision 7 (2006-01-26), document p.155
Full step-by-step for Software Update via CF Card
All 4 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Software guides
ADVP — DICOM Test Tool6 stepsPrinter Bootup-Message via HyperTerminal12 stepsEmergency SW Installation on a New, Empty Internal CF Card6 stepsEmergency SW Installation on a Printer in "Error - System Failure" State4 stepsEntering Site Data0 stepsAdjusting Image Quality at the Printer (LUT, Interpolation, Dmax)6 steps
View all DryStar 5300 guidesSource: DD+DIS346.05E — Drystar 5300, Repair and Service: Machine specific tools, software tools and auxiliary means, Chapter 3.2/39, §3.1.1 "Software Update via CF card", Edition 1, Revision 7 (2006-01-26), document p.155. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.