TroubleshootingSoftwareTroubleshootingTroubleshooting
Test Image STI1
STI1 is a composite test image built from several evaluation patterns; print it and read its three lightbox fields — a continuous grey wedge, a 256-square contrast grid, and a flat field — to catch contouring, square-visibility, and stripe artifacts before they turn into a customer complaint.
Applies to
Drystar 5300, Type 5365/100 — source Chapter 3.2, §2.3.1 "Testimage STI1" (one of 6 test images tabulated in the §2.3 test-images section; if a printed artifact needs isolating, source routes you from here to Chapter 3.3, Troubleshooting).
Personnel
1 technician · Basic — reach the Service Engineer Tools browser pages and the Service Command Session menu to print a test image, then judge a continuous grey wedge, a 256-square grid, and a flat field by eye at a lightbox (all stated directly in source). No densitometer reading is called for in this entry — all three fields are judged visually at the lightbox.
Steps
0 steps
Source
DD+DIS346.05E — Drystar 5300 Repair and Service, Machine specific tools, software tools and auxiliary means, Chapter 3.2/11-12, §2.3.1 "Testimage STI1", p.127-128, Edition 1 Rev.7
Full step-by-step for Test Image STI1
All 0 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Software guides
ADVP — DICOM Test Tool6 stepsPrinter Bootup-Message via HyperTerminal12 stepsEmergency SW Installation on a New, Empty Internal CF Card6 stepsEmergency SW Installation on a Printer in "Error - System Failure" State4 stepsEntering Site Data0 stepsAdjusting Image Quality at the Printer (LUT, Interpolation, Dmax)6 steps
View all DryStar 5300 guidesSource: DD+DIS346.05E — Drystar 5300 Repair and Service, Machine specific tools, software tools and auxiliary means, Chapter 3.2/11-12, §2.3.1 "Testimage STI1", p.127-128, Edition 1 Rev.7. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.