ProcedureSoftwareReference

Key-Operator Menu on the Local Keypad

Reach the Key-operator menu — the on-unit control surface that covers most installation, repair and maintenance actions — directly from the printer's local keypad, using four dedicated navigation keys.

Applies to

DryStar 5300, Type 5365/100 — source Chapter 3.2 §2.1 "Key-operator Menu on the local Keypad," Repair and Service: Machine specific tools, software tools and auxiliary means, Edition 1, Revision 7 (2006-01-26), document p.121 (chapter-relative footer "Chapter 3.2/5").

Personnel

1 technician · Basic — four dedicated physical keys (menu/character select up-down, digit select left-right, confirm, cancel) reachable directly at the printer's local keypad; no PC, browser or disassembly is involved. Source assigns no formal skill-level label to this section (derived).

Steps

4 steps

Source

DD+DIS346.05E — Drystar 5300, Repair and Service: Machine specific tools, software tools and auxiliary means, Chapter 3.2 §2.1 "Key-operator Menu on the local Keypad", Edition 1, Revision 7 (2006-01-26), document p.121 (chapter-relative footer "Chapter 3.2/5")

Full step-by-step for Key-Operator Menu on the Local Keypad

All 4 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.

Open the full procedure

Related Software guides

ADVP — DICOM Test Tool6 steps Printer Bootup-Message via HyperTerminal12 steps Emergency SW Installation on a New, Empty Internal CF Card6 steps Emergency SW Installation on a Printer in "Error - System Failure" State4 steps Entering Site Data0 steps Adjusting Image Quality at the Printer (LUT, Interpolation, Dmax)6 steps

View all DryStar 5300 guides

Source: DD+DIS346.05E — Drystar 5300, Repair and Service: Machine specific tools, software tools and auxiliary means, Chapter 3.2 §2.1 "Key-operator Menu on the local Keypad", Edition 1, Revision 7 (2006-01-26), document p.121 (chapter-relative footer "Chapter 3.2/5"). Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.