TroubleshootingDiagnosticsTroubleshooting
Dust Particles in the Film
A transparent spot on the film with a black particle visible at its center is dust or an aggregate trapped in the film's own top layer — a film-inherent defect, not a printer fault, and one the source states plainly cannot be avoided 100%.
Applies to
DryStar 5300 (Type 5365/100)
Personnel
1 technician · Basic — visual pattern match against the STI1 test image; no corrective procedure exists at the printer for this entry (see Solution).
Steps
0 steps
Source
DD+DIS346.05E — Drystar 5300 Repair and Service, Troubleshooting, Chapter 3.3 / 32 (item 11.4.4), p.194, Edition 1 Rev.7
Full step-by-step for Dust Particles in the Film
All 0 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Diagnostics guides
Performing the Acceptance Test3 stepsBlank LCD Display0 stepsBubbles0 stepsContouring Visible; 'Landscaping'0 stepsContrast and/or Sharpness Not Okay0 stepsDensity Reproduction Not Okay0 steps
View all DryStar 5300 guidesSource: DD+DIS346.05E — Drystar 5300 Repair and Service, Troubleshooting, Chapter 3.3 / 32 (item 11.4.4), p.194, Edition 1 Rev.7. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.