TroubleshootingDiagnosticsTroubleshooting

Blank LCD Display

If the LCD display on the Drystar 5300 never lights up after power-on, work through the two connector/power checks below before you conclude the display module itself has failed.

Applies to

DryStar 5300 (Type 5365/100)

Personnel

1 technician · Level 1 – connector-level and power checks, no disassembly

Steps

0 steps

Source

DD+DIS346.05E — Drystar 5300 Repair and Service, Troubleshooting, Chapter 3.3 (item 10), p.171, Edition 1 Rev.7

Full step-by-step for Blank LCD Display

All 0 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.

Open the full procedure

Related Diagnostics guides

Performing the Acceptance Test3 steps Bubbles0 steps Contouring Visible; 'Landscaping'0 steps Contrast and/or Sharpness Not Okay0 steps Density Reproduction Not Okay0 steps Dmax Too High or Too Low0 steps

View all DryStar 5300 guides

Source: DD+DIS346.05E — Drystar 5300 Repair and Service, Troubleshooting, Chapter 3.3 (item 10), p.171, Edition 1 Rev.7. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.