What is Philips CT error code ER32?

Rotor Control Board ARM processor error. It is reported by the Rotor Control Board on Access Series CT (6/16/Dual) CT systems. Severity: Alarm — stator control board error condition; subsystem: Rotor Control Board.

What should a field engineer do about ER32?

Check the Rotor Control Board LED indicators (Table 1-1) for the ARM/Spartan communication LEDs (V12, V18); if the fault persists, replace the Rotor Control Board.. Isolate the Rotor Control Board subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Access Series CT (6/16/Dual).

Alarm — stator control board error conditionRotor Control Board

ER32 — Rotor Control Board ARM processor error

Philips CT error code, reported by the Rotor Control Board.

What ER32 means

On Access Series CT (6/16/Dual) CT systems, status code ER32 indicates: Rotor Control Board ARM processor error. The code originates in the Rotor Control Board section of the Rotor Control Board. Severity level alarm (Alarm — stator control board error condition).

Reported action: Check the Rotor Control Board LED indicators (Table 1-1) for the ARM/Spartan communication LEDs (V12, V18); if the fault persists, replace the Rotor Control Board..

Listed in Table 1-3 'Stator Control Board Error Code vs System Error Code' of the Philips Access CT Service Trouble Shooting Guide (459800863401 Rev. C), for the Access Series CT (6/16/Dual) family. Not confirmed for other Philips CT systems.

Full troubleshooting for ER32

The complete diagnosis, cause tree, and step-by-step remedy for the Rotor Control Board subsystem are documented in the FSELIB Philips service manual — re-authored, web-first, with real figures.

Start free trial Open the service manual

7-day free trial · no credit card required

Related Rotor Control Board codes

ER33Rotor Control Board general error M13Rotor Control Board ARM processor warning N14Rotor Control Board warning 0000HUnclassified POST error (EMU code not matched to a specific fault)0010HCMOS checksum error (BIOS settings corrupted)0011HSystem date and time lost from CMOS/SE2P backup 0012HPC configuration lost (CMOS and SE2P backup both lost)0020HAT option ROM POST error

Discuss ER32 with other field engineers in the FSELIB forum

Source: Philips Access CT Service Trouble Shooting Guide — 459800863401 Rev. C. Reference information re-authored by FSELIB — not a copy of the OEM manual.