What is Philips CT error code E1810?

SAS subsystem detected a fault on the specified hard drive. It is reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware) on Mobile Network Device (MND) Extended Storage Option CT systems. Severity: Alarm — hardware fault; subsystem: Hard Drive / SAS Storage.

What should a field engineer do about E1810?

See the Troubleshooting a Hard Drive section (p.78) of the guide.. Isolate the Hard Drive / SAS Storage subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Mobile Network Device (MND) Extended Storage Option.

Alarm — hardware faultHard Drive / SAS Storage

E1810 — SAS subsystem detected a fault on the specified hard drive

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E1810 means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E1810 indicates: SAS subsystem detected a fault on the specified hard drive. The code originates in the Hard Drive / SAS Storage section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level alarm (Alarm — hardware fault).

Reported action: See the Troubleshooting a Hard Drive section (p.78) of the guide..

Listed as an LCD front-panel status/error code ('HDD ## Fault', Table 2 LCD Status Messages, p.23). '##' identifies the affected hard drive.

Full troubleshooting for E1810

The complete diagnosis, cause tree, and step-by-step remedy for the Hard Drive / SAS Storage subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Hard Drive / SAS Storage codes

200011D1Corrupted file system directory tree 200011D8Disk check (chkdsk) executed 200011E1Hard disk dismount failed 10052Application error on the Eleva Workspot when the operating-software DVD is not removed E061ABeam1 X signal path error E061BBeam2 X signal path error E061CBeam3 X signal path error E061DBeam0 Y signal path error

Discuss E1810 with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.