What is Canon Medical (Toshiba) CT error code 90000012?

GTS is resetting — operation blocked until the reset finishes. It is reported by the APPL — GTS status check on Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 CT systems. Severity: Information / dialog; subsystem: GTS (Gantry + Table System).

What should a field engineer do about 90000012?

Wait for the GTS reset to finish before continuing; if the system does not come back or the message persists, check GTS status and power per the service manual.. Isolate the GTS (Gantry + Table System) subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Aquilion RX / V4-62R004 / V3.20R003 / Aquilion ONE / V4.2.

Information / dialogGTS (Gantry + Table System)

90000012 — GTS is resetting — operation blocked until the reset finishes

Canon Medical (Toshiba) CT error code, reported by the APPL — GTS status check.

What 90000012 means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 CT systems, status code 90000012 indicates: GTS is resetting — operation blocked until the reset finishes. The code originates in the GTS (Gantry + Table System) section of the APPL — GTS status check. Severity level 0 (Information / dialog).

Reported action: Wait for the GTS reset to finish before continuing; if the system does not come back or the message persists, check GTS status and power per the service manual..

Toshiba/Canon Aquilion RX (V4-62R004), V3.20R003 and Aquilion ONE (V4.2) CT systems. This is a status message shown while the GTS (Gantry + Table System) is resetting.

Full troubleshooting for 90000012

The complete diagnosis, cause tree, and step-by-step remedy for the GTS (Gantry + Table System) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related GTS (Gantry + Table System) codes

B1100000Error in GTS B11A0000The CT fluoroscopy circuit is abnormal B13A0000Error in GNS Main-task B13B0000Error in GNS task B1420000Error in Gantry/Couch movement B1500000Request rejected during Gantry/Couch movement B1810000Error in offset data Aquisition B1A00000Error in Gantry/Couch condition. Set them again

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)

Discuss 90000012 with other field engineers in the FSELIB forum

Source: Toshiba/Canon CT service error message table (errmsg.eng, Aquilion RX V4-62R004 / Aquilion ONE V4.2). Reference information re-authored by FSELIB — not a copy of the OEM manual.