Error conditionContrast injector

5105 — Communication error between CAN Injector and S-CON after plan is selected.

Canon Medical (Toshiba) CT error code, reported by the console error system (EMS).

What 5105 means

On Aquilion 16 and Aquilion RX and Aquilion ONE and Aquilion S16 and Asteion Super4 and Activion16 CT systems, status code 5105 indicates: Communication error between CAN Injector and S-CON after plan is selected.. The code originates in the Contrast injector section of the console error system (EMS). Severity level error (Error condition).

Reported action: Injector error detected. Check the injector and the connection. If the problem persists call Service..

Reported by the Toshiba/Canon CT console error system (errmsg.eng / EMS error message table), shared across the Aquilion, Asteion and Activion CT platforms.

Full troubleshooting for 5105

The complete diagnosis, cause tree, and step-by-step remedy for the Contrast injector subsystem are documented in the FSELIB Canon Medical (Toshiba) service manual — re-authored, web-first, with real figures.

Start free trialOpen the service manual

7-day free trial · no credit card required

Related Contrast injector codes

5104Error from CAN Injector when plan is selected.5218CAN Injector controller error. : It happened after selecting exam plan.5219CAN Injector controller error. : It happened after selecting exam plan.5220CAN Injector controller error. : It happened after selecting exam plan.5221Injector communication error. : Serial connection failure. It may happened when injector power off.5222Injector communication error. : Communication is established but data is wrong.5223Injector communication error. : Communication is established but data is wrong.5224Injector communication error. : No response from Injector.

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)
Discuss 5105 with other field engineers in the FSELIB forum

Source: errmsg.eng — Toshiba/Canon CT console (EMS) error message table. Reference information re-authored by FSELIB — not a copy of the OEM manual.