GE Healthcare · MR
OrthoMRI Incorrect magnet temperature.OrthoMRI Unable to scan due to gradient error.OrthoMRI Replaced the SCTERM unit.Or…
OrthoMRI Incorrect magnet temperature.OrthoMRI Unable to scan due to gradient error.OrthoMRI Replaced the SCTERM unit.OrthoMRI Escan XQ.OrthoMRI Incorrect gradient power supply
Symptom
OrthoMRI Unable to scan due to gradient error
Error message
OrthoMRI Incorrect gradient power supply The 5 volt enable from the thermal control ciruit has been removed.
Applies to
- Product
- OrthoMRI Escan XQ EscanXQ and EscanNE
- Software
- OrthoMRI S/W Release 9.1B. OrthoMRI S/W Release 9.1B.
- Component
- OrthoMRI LNR9101148101 SCTERM Unit See long description. You must insert the correct SCTERM offset and the room temperature offset (read them from the label on the front side of the new SCTERM). Remember that the offsets are important to correctly read the magnet temperature errors but they don’t have any influence on the magnet warm up. The room temperature offset can be set only using step equal to ten units (e.g.: 10, 20, 30,……., 60, 70, etc)
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.