GE Healthcare · X-ray VascularInnova10501021050512
When Driving the Pivot Axis LAO/RAO the motion is Jerky.
Symptom
When Driving the Pivot Axis LAO/RAO the motion is Jerky. The Pivot will stop and have to be enabled again for motion to continue. When Driving the Pivot Axis LAO/RAO the motion is Jerky. The Pivot will stop and have to be enabled again for motion to continue.
Error message
1050102 or 1050512 Lat: Pivot AXIS POT ENCODER MISMATCH DO GantryAxis Intermittent Motion stop Pivot AXIS POT ENCODER MISMATCH 1 0 - potentiometerEncoderMismatch Z:/heroic/motion control task.c 4560 1050102 or 1050512 Lat: Pivot AXIS POT ENCODER MISMATCH DO GantryAxis Intermittent Motion stop Pivot AXIS POT ENCODER MISMATCH 1 0 - potentiometerEncoderMismatch Z:/heroic/motion control task.c 4560
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova 2000 Innova 2000 systems Innova 2000 systems Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.