GE Healthcare · X-ray VascularInnova1050674
INX1X1, Lateral Carriage will not hold calibration
Symptom
INX1X1, Lateral Carriage will not hold calibration
Error message
INX1X1: 1050674: Lat: CARRIAGE SWITCHES AND ABSOLUTE ENCODER INCONSISTENT 1050674 Lat: CARRIAGE SWITCHES AND ABSOLUTE ENCODER INCONSISTENT Debug: - Carriage position returned by MCB is inconsistent with switches value Error: 1050674: Lateral Carriage Switch and Absolute Encoder are not consistent at boot. When we calibrated the Carriage. It would work until the unit was powered down. At the next boot we would get the error.
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.