GE Healthcare · MR
No Table Position Display due to Cable Connector Fell Off J12 of the Table Electronics Board Internal to the Table.
Symptom
No Table Position Display but Table Moves In/Out and Up/Down See Long Description The system is an OpenSpeed. The table moves up/down and in/out and the alignment light comes on, but there is never any table position display on the magnet enclosure. It is always dark. The customer has already cycled all appropriate breakers and powered down the complete system, no help.
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.