GE Healthcare · X-ray VascularInnova50122
Check Exposure Switches are released, otherwise call Service is displayed on the DL flat panel monitor.
Symptom
Check Exposure Switches are released, otherwise call Service is displayed on the DL flat panel monitor.
Error message
50122 POS : FLUORO: FOOT OR HANDLE PREP SWITCH PERMANENT VALID HWStatus=0000 User=0000 0000 4AC7 50122 : Recommended Actions: Root Cause : Component(s) - Footswitch Handswitch. An error has been found on Footswitch or Handswitch on Positioner software. Recommended Actions: Run RTAC SIB RTBus diagnostics.
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.