GE Healthcare · X-ray VascularAdvantxInnova
ADVANTX E Collimator Blades are in the field after changing increasing II field size.
Symptom
ADVANTX E Collimator Blades are in the field after changing increasing II field size. There is no errror reported. Customer is able to manually open the collimator to the edge of the field.
Error message
ADVANTX E Collimator Blades are in the field after changing increasing II field size. There is no error message ADVANTX E Collimator Blades are in the field after changing increasing II field size. There is no errror reported. Customer is able to manually open the collimator to the edge of the field.
Applies to
- Models
- Advantx, Innova
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.