INX1X1, Message on Lat monitor, Lat positioner (gantry) error, Lat system will not move Error 1050171

Symptom

Error message

INX1X1, 1050171 VXWORKS error Debug - Movements limited at half speed cause the ramp management module can't update ramps 1050171 VXWORKS error Debug - Movements limited at half speed cause the ramp management module can't update ramps. Lat off park location May see from this error. 1050513, Lat: LAT PIVOT AXIS POWER, No Motion, Lat_Pivot_AXIS_POWER, 0, 0, - vinputNotDetected 1050501, Lat: LAT BUDDY PIVOT AXIS ENABLE, No Motion, Lat_BUDDY_Pivot_AXIS_ENABLE, 0, 0, - disableFromBuddyN 1050592, Lat: LAT CARRIAGE AXIS SWITCH ENGAGED, No Motion, Lat_Carr_AXIS_SWITCH_ENGAGED, 0, 0, - mcbLimitSwitch 1050148, ERR MISCELLANEOUS, Frt_ERR_MISCELLANEOUS, 0, 0, - Rall position not attained 1050592, Lat: LAT CARRIAGE AXIS SWITCH ENGAGED, No Motion, Lat_Carr_AXIS_SWITCH_ENGAGED, 0, 0, - Extra course switch engaged or 24V failure (4AB6) 1050513, CLEAR 1050501, CLEAR 1050148, CLEAR

Applies to

Models

Innova

Product

Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.