SID Issue, use lift orange button to move detector to highest position error 1000014.

SID Issue, use lift orange button to move detector to highest position error 1000014. That button is purple now SID Issue, use lift orange button to move detector to highest position error 1000014, That button is purple now 2000 OM Here is the link to the Innova2000 Operator Manuals: Heroic2 LVA FMI http://gein.euro.med.ge.com/tech_publications/docs/doc/heroicpdf/print-copy-enLVAFMI.pdf Heroic2VCP: http://gein.euro.med.ge.com/tech_publications/docs/doc/pdf/2394280-247_r1/om/en/HelpHomePage-en.htm SvcPack: http://gein.euro.med.ge.com/tech_publications/docs/doc/pdf/2405170-247_r2/om/en/HelpHomePage-en.htm They all have the following section: Chapter Innova Positioner Digital Detector Housing Controls Emergency Back-Out Raise (only) the Digital Detector by pressing one of the Emergency Back-Out buttons located on the Digital Detector (See Illustration). Note: This control must be used only: 1. To clear a collision Level 2 (see Section Collision Sensors) by allowing a 2.5 cm additional SID course. 2. To move away the Digital Detector from the patient in case of gantry failure. 3. In case of SID failure. Use this button to bring the Digital Detector to its highest position to still allow X-Ray.