GE Healthcare · X-ray VascularInnova13002042810008
INX1X1, Cannot do Innova Biplane fluoro or acquisition, Xray stopped - Restart Xray; if problem persists, call Service
Symptom
INX1X1, Cannot do Innova Biplane fluoro or acquisition, Xray stopped - Restart Xray; if problem persists, call Service Cannot do Innova Biplane fluoro or acquisition, frontal only fluoro and acquisition or Lateral only fluoro and acquisition is OK. Biplane fluoro or acauisition only gives one image on frontal then aborts.
Error message
Error 1300204 Lat RTBus 1300204 followed by 2810008 Sequence Degraded. Lat: Check any RTBus failure or Jedi RTBus failure, Abort, 4 missing x-ray on lateral synchronization pulses followed by 2810008 Sequence degraded, biplane review unavailable, DO, BIPLANE CONSISTENCY ERROR (degraded case 1): Biplane sequence with no pairOfFramesCountList on LAT 1300204 followed by 2810008 Sequence Degraded.
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.