GE Healthcare · X-ray VascularInnova60013
ID95205 Gantry moving slow due to Positioner XRAY TUBE collision Sensor errors.
Symptom
Gantry moving slow due to Positioner XRAY TUBE collision Sensor errors. Collimator Collision Sensor Gantry moving slow due to Positioner XRAY Tube Faceplate collision errors. Collimator Collision Sensor. This is a collison on the XRAY tube side. Usually indicated by HW code 0010 in the debug text of the error log.
Error message
error Code = 60013, error Text = POS : COLLISION SENSOR ACTIVATED. CLEAR AND TRY AGAIN, debug Text += pos-error=4AE6, recovery Class = WR, major Function /= LC Gantry System impact: From error.logging issue to Gantry lock-up. Displayed message : "Gantry collision occured. Clear and reverse motion to continue".
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.