GE Healthcare · X-ray VascularInnova281003316100202810023
Xray not Available - Reset System; If Problem Persists Call Service is displayed on the Image Monitor.
Symptom
Xray not Available - Reset System; If Problem Persists Call Service is displayed on the Image Monitor. Xray not Available - Reset System; If Problem Persists Call Service is displayed on the Monitor.
Error message
INx1x1: 2810033 IP Disk Write Error during acquisition Fluoro Write error 2810033 IP Disk Write Error during acquisition DO XRSubSysMgrDL acquisition Component(s)_DL_Image_Disk 0 0 xfer error returned. FluoroWriteOp.c 617 INX1X1: 1610020 Front: Fluoro storage error in IP 1610020 Front: Fluoro storage error in IP. WR XRImProc Fluorostore Frt_Component(s)_DL_Image_Disk 0 0 (null) IpOpErrorHandlers.cxx 358 2810023 An asynchronous error has been detected by the IP, warning generated 2810023 "An asynchronous error has been detected by the IP, warning generated" DO XRSubSysMgrDL (null) Component(s)_DL_Image_Processing_boards 0 0 ImpOperator.cxx 531
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Software
- Innova Biplane SPAD_M3 Innova Biplane SPAD_M3 Innova Biplane SPAD_M3
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.