GE Healthcare · MR2252239
2252239 Startup Timeout was detected on the Drivers Control Board due to Driver Module.
Symptom
Fails TPS Reset when booting up to Applications or when Resetting TPS See Long Description When the MR system is booting up to applications it will fail TPS reset but Applications will successfully boot. With Applications up and "Reset TPS" has been selected, TPS fails to download successfully.
Error message
2252239 Startup Timeout was detected on the Drivers Control Board
Applies to
- Product
- Open Speed with EXCITE For HFO4 and HFO5 only
- Software
- OPENMR5-HFO5 Open Speed with Excite Product
- Component
- 2296100 DRIVER MODULE for Excite See Long Description Excite 1 and 2 only. 10.0 and 11.0 Systems. Not for Excite HD. Also used on OpenSpeed with Excite.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- No signal on any Scans With no errors in log Due to Driver Module.
- SCP did not respond to the start packet of WavRec and Startup Timeout was detected on the Drivers Control Board Due to the Driver Board.
- HFD Cabinet Fan Motor is Shorted
- Fails TPS Reset when booting up to Applications or when Resetting TPS Due to failed Scan Room Power Supply.
- CWA ID141080. Unable to Start a New Patient Entry.
- Fails TPS Reset when booting up to Applications or when Resetting TPS Due to failed Scan Room Power Supply.