GE Healthcare · MRExcite225229452239
CWA ID93027. Unable To Scan With Driver Module Errors.
Symptom
Unable To Scan With Driver Module Errors Unable To Scan With Driver Module Errors.
Error message
2252294 The Driver Module Has Detected an Invalid Configuration. Source of Fault is Multi-Coil Board #1 Not Present.-> Dec 20 Thu 18:40:55 2252294 NSP SCP:DCB 304 Exception Class: Unknown Severity: Unknown Function: RF: RF Bias PSD: Spin Echo Coil: HD TRknee PA Scan: 52239/1 The Driver Module Has Detected an Invalid Configuration. Source of Fault is Multi-Coil Board #1 Not Present.-> See Long Description for Extended log... Error Code as viewed through the Service Browser with the Service Key installed: Dec 20 Thu 18:40:55 2252294 NSP SCP:DCB 304 Exception Class: Unknown Severity: Unknown Function: RF: RF Bias PSD: Spin Echo Coil: HD TRknee PA Scan: 52239/1 The Driver Module Has Detected an Invalid Configuration. Source of Fault is Multi-Coil Board #1 Not Present.-> Extemded Log viewed by clicking on the Hyperlinked Error code above: 2252294 ERROR: EM_DCB_CONFIG_FAIL The Driver Module Has Detected an Invalid Configuration. Source of Fault is %b. Extended Error: The requested Driver configuration has been determined to be invalid. The source of the fault will give specific information regarding the fault. Fault could be caused by hardware or software. Possible cause(s): Driver Modul
Applies to
- Models
- Excite
- Product
- Excite HDx Includes "Excite HDi" system. 14.0 Software only.
- Software
- 14.0 M5 Excite HDx HDi Platforms only.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.