GE Healthcare · X-ray VascularAdvantxInnova
When the fluoro pedal is released, the power unit goes into reset preventing exposure
Symptom
When the fluoro pedal is released, the power unit goes into reset preventing exposure When the fluoro pedal is released, the power unit goes into reset preventing exposure. error codes 42C4 followed by 4260 followed by 422D are logged when the fluoro pedal is released, the power unit goes into reset preventing exposure. error codes 42C4 followed by 4260 followed by 422D are logged
Error message
ADX: 42C4 No Anode Rotation; Try Again is reported on the Advantx Console. Followed by 4260 power unit in reset state. 422D power unit inactive.
Applies to
- Models
- Advantx, Innova
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems Advantx, LFX Advantx product line LFX Advantx product line Advantx E Biplane Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane) Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane)
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.