GE Healthcare · X-ray VascularInnova200207
No Acquisition exposure, fluoro or record
Symptom
No Acquisition exposure, fluoro or record will not fluoro or record after boot. No issue with Positioner movement, DL, Rtac and detector is up. Innova 2100iq system will not fluoro or record after boot. No issue with Positioner movement, DL, Rtac and detector is up. Error 3200011
Error message
200207 PrepOn requested while the SPIN or Bolus 200207 Software Debug information DO XRAcqSync control Software_Problem 1 3 PrepOn requested while the SPIN_SAFE_TEST inhibit is still active for opMode 6 XRPAtlasLogger.cpp 156 200207 PrepOn requested while the MOTION CONTROL ERROR inhibit is still active for opMode 20 200207 Software Debug information DO XRAcqSync control Software_Problem 1 3 PrepOn requested while the SPIN_SAFE_TEST inhibit is still active for opMode 6 XRPAtlasLogger.cpp 156. This error is logged when the customer attempts to make an acquisition during the Spin Test Blous, 200207 PrepOn requested while the MOTION CONTROL ERROR inhibit is still active for opMode 20
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.