GE Healthcare · X-ray VascularInnova5001550210

Gantry moving slow due to Positioner XRAY TUBE collision Sensor errors.

Symptom

Gantry moving slow due to Positioner XRAY TUBE collision Sensor errors. Collimator Collision Sensor Gantry moving slow due to Positioner XRAY Tube Faceplate collision errors. Collimator Collision Sensor. This is a collison on the XRAY tube side. Usually indicated by HW code 0010 in the debug text of the error log.

Error message

error Code = 50015, error Text = POS : COLLIMATOR COLLISION, debug Text /= pos-error=4A13, hw-status=0010, usr-status=0000, recovery Class /= WR, major Function /= VAS / POS System impact: Half speed until system level1 collision is cleared. Error message cleared following 2 seconds. Displayed message : "Collimator collision: reverse motion to continue".

error Code = 50210, error Text = COLLISION DETECTION PROBLEM: Dynamic Procedure is aborted, debug Text += pos-error=4AB5, hw-status=0010, recovery Class = WR, major Function /= VAS / POS System impact: Bolus X-ray unavailable. Displayed message : "Collision detection failure, continue with care; Otherwise call Service"

Applies to

Models
Innova
Product
Innova 2000 Innova 2000 systems Innova 2000 systems Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
Component
Positioner Gantry Positioner Gantry Positioner Gantry
Area
X-ray Vascular

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare X-ray Vascular issues