3D acquisition, x-ray aborts at start of spin.

Symptom

Error message

2200010, error Text = RT changed Mask signal problem followed within 2 seconds by 2210001, error Text = Generic SW error for positioner subsystem System impact: Bolus or 3D acquisition aborted. Displayed message : "Xray aborted - Restart Xray; if problem persists, call Service" 2200010, error Text = RT changed Mask signal problem, debug Text += did not receive RTB_TABLE_MOVE_STATUS_HIGH since startPrepare, recovery Class = AR, major Function /= XRPatPos followed within 2 seconds by 2210001, error Text = Generic SW error for positioner subsystem, debug Text += RTLine is probably stuck, recovery Class = AR, major Function /= XRPatPos System impact: Bolus or 3D acquisition aborted. Displayed message : "Xray aborted - Restart Xray; if problem persists, call Service" For Bolus X-ray abort after the first 1 or 2 Mask exposures. For 3D X-ray abort as soon as acquisition is started. error Code = 2200010, error Text = RT changed Mask signal problem, debug Text += did not receive RTB_TABLE_MOVE_STATUS_HIGH since startPrepare, recovery Class = AR, major Function /= XRPatPos followed within 2 seconds by error Code = 2210001, error Text = Generic SW error for positioner subsystem, debug Text +=

Applies to

Models

Innova

Product

Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.