GE Healthcare · X-ray VascularInnova1600017
Xray not Available - Reset System; If Problem Persists Call Service is displayed on the Image Monitor.
Symptom
Xray not Available - Reset System; If Problem Persists Call Service is displayed on the Image Monitor. Xray not Available - Reset System; If Problem Persists Call Service is displayed on the Monitor.
Error message
1600017, error Text = An asynchronous error has been detected by the IP, reset req., debug Text += class IpCeServiceIP HANG CPU, recovery Class = IH System impact: Exam failure. Displayed message : "Xray not available - Reset system; if problem persists, call Service". 1600017, error Text = An asynchronous error has been detected by the IP, reset req., debug Text += class IpCeServiceIP HANG CPU, recovery Class = IH, major Function /= XRImProc System impact: Exam failure. Displayed message : "Xray not available - Reset system; if problem persists, call Service". error Code = 1600017, error Text = An asynchronous error has been detected by the IP, reset req., debug Text += class IpCeServiceIP HANG CPU, recovery Class = IH, major Function /= XRImProc
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- Digital Leader (DL) Digital Leader Digital Leader (DL)
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.