GE Healthcare · X-ray VascularInnova1050259

Innova X100, 1050259 is logged in the error log on boot up, All table functions work properly.

Symptom

Innova X100, 1050259 is logged in the error log on boot up, All table functions work properly. - -- OMEGA4/5 -- motorization licensed asked by System, BUT stepper not available 1050259 is logged in the error log on boot up, All table functions work properly. - -- OMEGA4/5 -- motorization licensed asked by System, BUT stepper not available

Error message

1050259 Stepper Board Initialization Error 1050259 STEPPER INIT BOARD ERROR WR GantryAxis 0 STEPPER_INIT_BOARD_FAILURE 1 0 - -- OMEGA4/5 -- motorization licensed asked by System, BUT stepper not available Z:/heroic/table_geometry_task.c 480 1050259 STEPPER INIT BOARD ERROR WR GantryAxis 0 STEPPER_INIT_BOARD_FAILURE 1 0 - -- OMEGA4/5 -- motorization licensed asked by System, BUT stepper not available Z:/heroic/table_geometry_task.c

Applies to

Models
Innova
Product
Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
Area
X-ray Vascular

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare X-ray Vascular issues