GE Healthcare · MR
Entries in the Patient Register Could Not be Removed.
Symptom
Entries in the Patient Register Could Not be Removed Two Entries in the Patient Register could not be removed. This normally can be done by highlighting an entry, holding down the right mouse button, and then selecting the `cut' soft key from the pull down menu. This should delete the entry. This didn't work at this site.
Error message
DO NOT USE Exam will not delete from Patient Registry
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.