The Omega table top locks do not release and the customer is unable to move the table top.

Symptom

Error message

error Code = 60013, error Text = POS : COLLISION SENSOR ACTIVATED. CLEAR AND TRY AGAIN, debug Text += pos-error=4AE6, recovery Class = WR, major Function /= LC Gantry System impact: From error.logging issue to Gantry lock-up. Displayed message : "Gantry collision occured. Clear and reverse motion to continue".

4AE6 Gantry collision occurred. Clear and continue. The collision error does not clear. 60013 4AE6 00 0B 0000 Gantry collision occurred. Clear and continue. Innova systems = 60013 Gantry collision occurred, Clear and reverse motion to continue. 4AE6 00 0B Gantry collision occurred. Clear and continue. Innova systems = 60013 Gantry collision occurred, Clear and reverse motion to continue.

Applies to

Models

Advantx, Innova

Product

Advantx E Biplane Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane) Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane) Advantx, LFX Advantx product line LFX Advantx product line Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.