GE Healthcare · MR
Intermittent High Noise on HFO Head Coil Due to Head Coil.
Symptom
Intermittent high noise on HFO head coil images. Happens on both sides of MSHS. When coil works its fine, when its noisy, its almost all noise. Connection and cable seem ok.
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Component
- 2299522-2 0.7T HEAD T/R PA COIL & BASEPLATE ASSEMBLY WITH CABLE 0.7T HEAD T/R PA COIL & BASEPLATE ASSEMBLY WITH CABLE 2299522-2 0.7T HEAD T/R PA COIL & BASEPLATE ASSEMBLY WITH CABLE 2299522-2
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.