GE Healthcare · MRExcite
FE looking to see if he could use the Network (NIC) Card from the HP8200 and install it in the HP9300
Symptom
May the Network (NIC) Card be Moved from an HD 12x (HP8200) Host Computer to an HDx 14x (HP9300) Host Computer? FE is about to upgrade a system to 14x from 12x. He wants to try to save time and generate the 14x eLicenses now, using the hostid of the old computer (HP8200) which is resident on its network card, then walk the old network (NIC) card over to the new computer (HP9300) when it arrives so the options will still be valid. Can he or should he do this?
Applies to
- Models
- Excite
- Product
- 3T Excite HDx 14.0 Software. The software that this solution is tied to is indicated by the Software concept below.
- Software
- 14.0 For both Excite HDx and 3T Excite HDx systems.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.