The Omega table top locks do not release and the customer is unable to move the table top.

Symptom

Error message

INx100: 1050182 TBL AXIS POT ENCODER FAILURE PATIENT_HEIGHT out of range 1050182 TBL AXIS POT ENCODER FAILURE DO Table Intermittent Motion Stop TBL_AXIS_POT_ENCODER_FAILURE 1 4 - Table: Encoder, potentiometer failure (4AC3 Hw:0x0000 & US:0x0800), PATIENT_HEIGHT out of range Z:/heroic/table_geometry_task.c 1553 Review the Debug text and identify the table axis. Check the corresponding Encoder, Potentiometer and cables.

Applies to

Models

Innova

Product

Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Component

Omega V Table Omega V Table Omega V Table Innova 2100–IQ Case Innova 2100–IQ System can be supplied with an OMEGA IV Compact patient table, an OMEGA V long patient table, which includes a table side control with Contour Filter, or a InnovaIQ patient Table. Innova 3100/3100-IQ and 4100/4100-IQ Case Innova 3100/4100 Systems can be supplied with an OMEGA V Long patient table or InnovaIQ patient Table, which includes a table side control with Contour Filter. Illustration 2-1: Omega patient table (with TSSC)

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.