OrthoMRI Coil locking device is broken
Symptom
OrthoMRI The coil moves even after the locking mechanism is locked Inside the gantry the knee coil is locked by the coil lock mechanism, sometimes also if the coil lock mechanism is open the coil is not perfectly locked: it’s not possible to remove it but it’s possible to rotate it. In this case, it’s necessary to place one or two plastic disks under the coil. Inside the gantry the knee coil is locked by the coil lock mechanism, sometimes if the coil lock mechanism is open the coil is not perfectly locked: it’s not possible to remove it but it’s possible to rotate it. In this case, it’s necessary to place one or two plastic disks under the coil.
Applies to
- Product
- OrthoMRI Escan XQ EscanXQ and EscanNE
- Software
- OrthoMRI S/W Release 9.1B. OrthoMRI S/W Release 9.1B.
- Component
- OrthoMRI LNR9102029000 Coil lock mech You can also try LNR9102029300 which is the blue handled one if the LNR9102029000 is not in stock.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.