GE Healthcare · MR20013
OrthoMRI Foot/Ankle cable coil is broken.
Symptom
OrthoMRI Cannot run a scout OrthoMRI Cannot run a scout.
Error message
OrthoMRI 20013 Incorrect Signal. Varicap2 Calibration The entire message reads: 20013 Incorrect signal. Varicap2 calibration, the amplitude of the signal during calibration isn't in a wished form, there is something not OK, check the .rec files. Do you want to proceed?
Applies to
- Product
- OrthoMRI Escan (Unix Digital) Two easy ways to tell if the Escan Unix system is analog or digital. First, the analog service password is coil and the digital password is probe. Second, the analog daily QA phantom is a bottle where as the digital daily QA phantom is a large spherical ball.
- Software
- OrthoMRI Unix 2.x
- Component
- OrthoMRI P/N LNR8800031002 CABLE FOR FOOT/ANKLE COIL. OrthoMRI P/N LNR8800031002 CABLE FOR FOOT/ANKLE COIL. There is a PSDB solution available for deselecting the automatic coil recognition for ALL OrthoMRI systems. If need be, follow that resolution. Then the system can be used as normal once the operator manually selects which coil is being used while on the patient set up page. The most common failure is the particular coil's cable. If multiple coils have this issue the fix could be the mechanical swing arm.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- OrthoMRI Shoulder coil 1 will not tune without errors.
- OrthoMRI Wrong coil was selected
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.