GE Healthcare · MR20013
OrthoMRI Shoulder coil 1 will not tune without errors.
Symptom
OrthoMRI Getting an error when running a scout.
Error message
OrthoMRI 20013 Incorrect Signal. Varicap2 Calibration The entire message reads: 20013 Incorrect signal. Varicap2 calibration, the amplitude of the signal during calibration isn't in a wished form, there is something not OK, check the .rec files. Do you want to proceed?
Applies to
- Product
- OrthoMRI Escan XQ EscanXQ and EscanNE
- Software
- OrthoMRI S/W Release 9.1B. OrthoMRI S/W Release 9.1B.
- Component
- OrthoMRI LNR9101819001 TUNABLE SHOULDER COIL AND CAP KIT TUNEABLE SHOULDER COIL USED ON MR AND CAP KIT ROUTED TO USAI FOR CONSUMABLE COLLECTION PER MIKE DIGGINS 1-03, A. MASCH DO NOT DISCOUNT - PER SHAKUN. Added per E-Scan RSPL. Tune the coil to the magnet frequency using the capacitor kit. Then, calibrate the varicap value and RF180 pulse and save these in manual coil tuning. Check coil SNR.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- OrthoMRI Foot/Ankle cable coil is broken.
- OrthoMRI Wrong coil was selected
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.