OrthoMRI The coil ID is not working on all coils.
Symptom
OrthoMRI The coil ID is not working on all coils.
wqr
See Long Description OLEs/RSE's are required to gather Coil Serial number and Part number and place the info in the Tech log box for Diagnosis and Troubleshooting: If the information is available to the customer without affecting their current work flow, the OLE should attempt to gather this information when the call is not split (paged) to the FE . Otherwise the OLE should state that " the coil or system is in use at time of call and the coil information is not currently accessible ". If the RFS is properly split it should link the next RFS and the FE would be able to provide this information. FEs are required to gather Coil Serial number and Part number and answer the Coil question in FEMC debrief where they will place the info in the PopUp Box. Proprietary, For GE Healthcare personnel Only This information is Property of GE Healthcare - For GE Healthcare Service Personnel Only. Disclosure to Third Parties Prohibited.
wqr
212002465 6 May 2011
Error message
OrthoMRI Unknown Coil Error The system does not recognize the coil that is plugged in for use. The high failure part is the coil cable. If this error occurs on more than one coil, the mechanical swing arm cables is the next high failure part.
Applies to
- Product
- OrthoMRI EscanNE. OrthoMRI EscanNE.
- Software
- OrthoMRI S/W Release 9.1B. OrthoMRI S/W Release 9.1B.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.