Possibility of sensor flag damage during the table operation
Symptom
Possibility of sensor flag damage during the table operation See Long Description SMILe 6/27/07 Effectivity: Signa HDe 1.5T System Problem: If operator performs table operations in the following manner, there is possibility that the sensor flag damage may occur. a. Lowering the table just after cradle gets to the home position. b. Undocking the table just after cradle gets to the home position. c. Undocking the table just after table is docked when table is up limit position. d. Lowering the table just after table reaches up limit when table is docked. (See Resolution Concept for the complete SMILe released 6/27/07)
Applies to
- Models
- Excite, Signa
- Product
- Excite HDe. For Hino HDe 14.0 and HDe 15.0 Software Systems only
- Software
- HDe 14.0 For Hino Excite HDe 14.0 systems only.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.