Zipper artifacts due to RF leak in screen room door.
Symptom
MRIQ Intermittent Zipper Artifacts or Coherent Noise on Excite 1.5T HD See long description A straight line or a thick band of bright signal, also known as a "zipper" artifact or coherent noise, has been reported on the images of a few newly installed or upgraded 1.5T EXCITE HD systems. Most of these artifacts occur intermittently and often go away for a period of time after a part is replaced or a cable is moved. These artifacts will also sometimes cause SPT Coherent Noise Test to fail or the artifacts will be clearly visible in one or more of the resultant SPT Coherent Noise test images. On rare occasions this problem will manifest itself as high background noise on the images without the "zipper" artifact. This effect may be more pronounced on body and some surface coil images. These problems have not been seen on 3.0T EXCITE HD systems. Link to image quality troubleshooting guide. http://3.87.118.28/optec3/common/8xdocs/epst/mod11/m11_010_000.html
Applies to
- Models
- Signa, Excite
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.