GE Healthcare · X-ray VascularInnova4200061
System not yet configured for a protocol, Method call not allowed due to power failure or system HALT error
Symptom
System not yet configured for a protocol, Method call not allowed due to power failure or system HALT error System not yet configured for a protocol, Method call not allowed due to power failure or system HALT error. System not yet configured for a protocol, Method call not allowed due to power failure or system HALT error
Error message
4200061 Method call not allowed due to power failure or system HALT error 4200061 DO XRUserIf Method call not allowed due to power failure or system HALT error: Debug: system not yet configured for a protocol.
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.