GE Healthcare · X-ray VascularInnova1200112
Detector Temperature when first turn on will cause the DL not to boot because the Rtac will not boot if detector is to c…
Detector Temperature when first turn on will cause the DL not to boot because the Rtac will not boot if detector is to cold or issues with Conditioner.
Symptom
Detector Temperature when first turn on will cause the DL not to boot because the Rtac will not boot if detector is to cold or issues with Conditioner.
Error message
1200112 ERR_CONDITIONER_BOOT_WARNING . Conditioner boot warning. sn4764 DIPB oscillator preventive check 1200112 ERR_CONDITIONER_BOOT_WARNING . Conditioner boot warning 1200112 ERR_CONDITIONER_BOOT_WARNING . Conditioner boot warning. See sn4764 DIPB oscillator preventive check
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Component
- Detector conditioner 5131740 SMC detector conditioner Detector conditioner Current rev is -15 but a -7 through -15 is acceptable. Detector Conditioner, connecter kit 2379172 5131740 SMC detector conditioner Detector conditioner Current rev is -15 but a -7 through -15 is acceptable. Detector Conditioner, connecter kit 2379172
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.