GE Healthcare · MRExciteSigna60708
FMI 60708 Signa EXCITE 3.0T Integrated Patient Comfort Module IPCM was installed, but the required ipcm option key was n…
FMI 60708 Signa EXCITE 3.0T Integrated Patient Comfort Module IPCM was installed, but the required ipcm option key was not installed on the system. 3T Excite HDx 14.0.
Symptom
Information for FMI 60708 Signa Excite 3.0T Integrated Patient Comfort Module IPCM FMI Instructions state to consult the OLC if MR site is running G3 M4A or 12.0M4 software instead of the required 12.0M5 software. If the 3T site is running G3 M4A software or 12.0 M4 software the FE may proceed with the FMI but will have to modify the MRconfig.cfg file.
Applies to
- Models
- Excite, Signa
- Product
- 3T Excite HDx 14.0 Software. The software that this solution is tied to is indicated by the Software concept below.
- Software
- 14.0 For both Excite HDx and 3T Excite HDx systems.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.