GE Healthcare · X-ray VascularInnova1050273
No power to system.
Symptom
No power to system. No power to table. tssc is blank. No xray. No power to table. tssc is blank. No power to system. No power to table. tssc is blank.
Error message
1050273 PIB 48V MONITORING Martek: 48V outside limits. 1050273 PIB 48V MONITORING DO PositionerPower 0 Component(s) Positioner Martek 1 0 - Martek: 48V outside limits. Lift motor problem This error is due to an error found by one of the PIB on the Positioner Modular power units. Root Cause: 1050273 PIB 48V MONITORING DO PositionerPower 0 Component(s) Positioner Martek 1 0 - Martek: 48V outside limits. Component(s) - Lift motor problem This error is due to an error found by one of the PIB on the Positioner Modular power units. Recommended Action: If the error name is PIB 230V MONITORING, check the 230V Module, the backplane and the PIB input. If the error name is PIB 48V MONITORING, check the 48V Module, the backplane and the PIB input. If the error name is PIB 180V OVERTEMP, check the 180V Module for overtemperature conditions. If the error name is MARTEK 230V OVERTEMP, check the 230V Module for overtemperature conditions. If the error name is MARTEK 48V OVERTEMP, check the 48V Module for overtemperature conditions. Replace parts found faulty.
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Component
- UL PDB (cat 450xx) UL PDB UL PDB
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.