GE Healthcare · MR
The SPT Head Quick Check Fails Due to Wrong Phantom.
Symptom
"Install_in_spec" Key Generation Fails.
Error message
SPT Gradcal X failed This error message is output from the "install_in_spec" program. Sorry The system calibration is not complete. System is not ready for diagnostic imaging This message is output by the install_in_spec program, and may be found in the install_in_spec.log and install_in_spec.log.bak files in directory /usr/local/bin SPT Gradcal Z failed This error message is output from the "install_in_spec" program. SPT Gradcal Y failed This error message is output from the "install_in_spec" program.
Applies to
- Product
- Open Speed with EXCITE For HFO4 and HFO5 only
- Software
- OPENMR5-HFO5 Open Speed with Excite Product
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.