GE Healthcare · MR
The 5 VDC Power Supply in the System Monitor is out of Specification.
Symptom
P.05.5 or Blank Display on Contour System Monitor After system power on, there is a possibility that System Monitor stops it's operation with one of the following conditions: • 'P050' is shown in 7Seg LED display on System Monitor • Nothing is shown in 7Seg LED display.
Error message
P.05.0 This error code is displayed on the System Monitor.
Applies to
- Product
- Contour 3 & 4
- Software
- Profile Contour 7.67 Applies to Profile1 through 4 and Contour1 through 4. This is the last revision of software for this product line. Requires 7.66 LFC. 7.67 is a patch.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.