GE Healthcare · MRSignaHiSpeedExcite222473322256972225691222479022259352225334
PDU in Stop Mode and TPS Download failure
Power Surge or Drop.
Symptom
PDU in Stop Mode and TPS Download failure
Error message
2224733 - The SRI is not responding. Please reset the TPS chassis and try again. 2225697 MDS link failure. The IPG failed to receive an MDS transmission echo on a second try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. MDS timer: 0x0012 Transmitted byte: 0x11 2225697 MDS link failure. The IPG failed to receive an MDS transmission echo on a second try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. MDS timer: 0x0012 Transmitted byte: 0x11 2225691 MDS link failure. The IPG failed to receive an MDS transmission echo 2225691 MDS link failure. The IPG failed to receive an MDS transmission echo. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. MDS timer: 0x0006 Transmitted byte: 0x11 2224790 Hardware Error: Please reset TPS. A MDS link error during download 2224790 Hardware Error: Please reset TPS. A MDS link error during download. The SPI failed to receive a MDS transmission echo. Check the connections and signal level on the MDS fiber optic link. Processor: GRAD File: mdsboot.i96 MDS timer: 0x0000 Xmtd byt 2225935 The PAC does
Applies to
- Models
- Signa, HiSpeed, Excite
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.