GE Healthcare · MRExcite2252236225223022521332252232
The CAN Link is Reporting Hard or Intermittent CAN Link Failures.
Symptom
The CAN Link is Reporting Hard or Intermittent CAN Link Failures. Any device on the CAN Link may suddenly start reporting hard or intermittent CAN Link failures and CAN Link communications may be interrupted. Replacing the suspect part will not fix the problem.
Error message
2252236 Can Link Diagnostic Data Mismatch Error. 2252230 Network Management Failure detected on the CAN network. 2252133 SDO Communication Failure was detected on the CANopen Protocol.Node Detecting Failure = %b. 2252133 SDO Communication Failure was detected on the CANopen Protocol. Node Detecting Failure = %b. 2252232 SCP detected a Node Reset on the CAN network. Reset Node is %b.
Applies to
- Models
- Excite
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.