GE Healthcare · MRExcite2248356
No Clock Signal Due To an open primary winding on the low-voltage AC line clock transformer.
Symptom
Manual Pre Scan MPS runs for 5 to 10 seconds and then stops with error: SSI Watchdog Timeout. New Excite II system install running 11.0 M4 software. The FE is trying to do the RF cals. Manual Prescan runs for 5 to 10 seconds and then stops with error: "SSI Watchdog Timeout. An SSI was not detected in the timeout period. The PSD or AGP might not be running.
Error message
2248356 SSI Watchdog Timeout. An SSI Was Not Detected in the Timeout Period. See Long Description Wed Jul 7 09:33:17 2004 Error: 2248356 Host: GEMRI_1Process: NSP File: SCP:sct_wdog_exp Line: 852 SSI Watchdog Timeout. An SSI was not detected in the timeout period. The PSD or AGP might not be running. It may be necessary to perform a TPS reset. If TPS Reset doesn't help then AC 60Hz clock may be missing. Extended Error: Check the 60Hz clock signal from PDM to STIF Board in CAM chassis. Run CAM Data Acquisition SRF Diagnostics.
Applies to
- Models
- Excite
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.